Sony CDX-MP450X Mode D'emploi page 17

Playing the stored program
During playback, press (3) (PGM).
Program Play starts.
To return to normal play mode, select
"PGM -OFF."
Note
"NO DATA" appears in the display if no file is
stored in the program.
Erasing an entire program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
3
Press the (–) side of (FLDR/PRESET)
repeatedly until "ERASE-ALL" appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) twice.
Adding files to the program
1
During playback, press (MENU), then
press either side of (FLDR/PRESET)
repeatedly until "PGM-SET" appears.
2
Press (ENTER).
When adding a file to the end of a program,
skip step 3.
3
Press either side of (FLDR/PRESET)
repeatedly to select the program
number where you want to insert a new
file.
4
Press either side of (SEEK) repeatedly to
select the new file.
5
Press (ENTER).
The selected file is inserted at that program
number, and the succeeding files are
renumbered.
To continue inserting files, repeat steps 3 to
5.
6
Press (MENU) twice.
Note
Once all 20 slots have been filled, "**FULL**"
appears in the display, and you cannot insert more
files.
continue to next page t
Program No.
17