4
•
CARE
CLEANING THE OUTER SURFACES
To clean the outer surfaces on your
hood, use soapy water and do not use
scouring creams or scouring sponges.
4.1 - CLEANING THE FILTER CAS-
SETTES
They must be cleaned after every
30 hours approximately of use or at least
once a month. Use a brush, warm water
and a mild detergent. Rinse and dry them
carefully before putting back in place.
4.2 - CHANGING THE CARBON FIL-
TER
This filter holds odours; it should be re-
placed after approximately 120 hours of
use.
Order these filters from your dealer.
- Remove the filter cassettes.
- Remove the two metal fixings (4)
- Remove the carbon filters (3)
- Fit new filter on to the filter cassettes.
- Re-position the 2 fixings (4).
- Fit the filter cassette back in place.
- Repeat this operation for all filter cas-
settes.
4.3 - CHANGING THE LED LAMPS
Contact after sales service.
25