Material Code For Dielectric Measurements - Wohler HBF 420 Mode D'emploi

Device
4.4.2 Material code for
dielectric
measurements
46
For the dielectric measurement, the material
codes 0 - 20 can be chosen.
The material code for measurements with the
dielectric probe is selected based on the bulk
density of the material to be measured; it should
be noted that with increasing bulk density, the
material code to be selected also increases.
1. The codes 'Cd05' to 'Cd10' are suitable for
taking measurements of wood (bulk density
approx. 400 to 600 kg/m
2. The codes 'Cd15' to 'Cd18' are suitable for
taking measurements of brickwork, floor
screed and concrete (bulk density approx.
1600 to 2200 kg/m
3
).
3
).