System Reset; Backlight - PERFECTPRO ROCKBOX Manuel De L'utilisateur

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the Menu button,
3. Rotate the Tuning knob until the display shows "System". Press the Tuning knob.
4. Rotate the Tuning knob until the display shows "Factory reset". Press the Tuning
knob.
5. Rotate the Tuning knob to select between "Yes" or "No".
Select "Yes" if you wish to reset the radio, otherwise, select "No".
6. Press the Tuning knob to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will show "WELCOME TO DIGITAL RADIO" for a few seconds, and then
the radio will automatically perform an auto scan of the Band III DAB channels and
the FM band, the display will show "ATS setting".
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect the power supply.

BACKLIGHT

When the radio is in operation or in standby, pressing any button will illuminate the LCD
display for approx. 10 seconds.
GB
G B
14