Changing The Lamps - baumarkt TI0190 Manuel D'instructions

Care and maintenance
3. Place the square carbon filter on the recess. The carbon filter is held in place
by the integrated magnets.
4. Insert the grease filters with their rear ends in the recess on the bottom of the
extraction hood. Push the grease filters upwards and allow the lock to click
into place.
5. Reestablish the power supply.
If one of the lamps no longer functions, it may no longer be used. The bulb must

Changing the lamps

be replaced.
The appliance operates using a hazardous voltage. Before replacing
Electrical shock hazard!
the bulb, disconnect the mains plug. Do not touch any live
components inside the socket.
Before opening the cover and removing the bulb, allow the bulb to
Risk of burns!
cool down.
Do not touch the new bulb with your fingers, because this will reduce
Important!
the service life. Use a dry cloth.
LED lamps have a very long service life (up to 50,000 hours). They are not
affected by impacts and vibrations.
However, if an LED lamp should stop working, please consult our hotline (see
"Our service", page 21). The exchange must be carried out by a trained electrician
only.
18
General