baumarkt TI0190 Manuel D'instructions page 33

Installation
2. Place Island extraction hood onto extraction hood and fix it by means of bolts.
3. Insert the extraction hood into the mounting rails and affix with screws.
4. If the extraction hood is going to be used in extraction mode, position the
exhaust air hose on the opening on the top of the extraction hood and fix it in
place with the hose clip (not included in the scope of delivery).
5. Connect the power cable extending out of the top of the extraction hood up to
the power supply.
6. Pull the lower section of the chimney down until it meets the extraction hood.
Preparation
13
English