Ilda / Computer Control; Final Statement - Laserworld Club Série Mode D'emploi

Press „Exit" to return to the settings menu.
Microphone Sensitivity Settings
The sensitivity of the built-in microphone for the control of the sound-to-light operation can be
adjusted in the „SEnS" menu. Press „Enter" to change the settings. Use the „Up" / „Down" button to
change the selection.
The sensitivity can be adjusted between 1 and 100. Standard value is 50.

8.2.6. ILDA / COMPUTER CONTROL

The laser can be used with any laser control software that
supports the ILDA control signal via sub-d connector. Use
an ILDA cable to connect the Digital Analog Converter
(DAC / ILDA interface) of the laser software to the ILDA in
port at the laser.
The laser automatically detects if a DAC is connected and
switches to ILDA operation. For safety reasons always
make sure to first switch the laser to DMX operation
mode (See 8.2.4. DMX Operation) before you connect the
ILDA cable, to prevent unintended laser emission if the
ILDA cable is removed by accident.
Recommended computer control software for your laser:
Showeditor Set with ShowNET www.showeditor.com
Showcontroller Set with ShowNET
www.showcontroller.com
14 / 45
Laserworld CS-1000RGB Laserworld CS-1000RGB

Final statement

Laserworld products are tested and product packaging is inspected before leaving our warehouse.
Users must to follow the local safety regulations and warnings within this manual and adhereto
any regulations within its place of use. Damages through inappropriate use will void any liability or
warranty of our products.
Due to continual product developments, please check for the latest update of this product manual
at www.laserworld.com. If you do have any further questions, then please contact your dealer/place
of purchase or use our contact section on our website.
For service issues, please contact your dealer/place of purchase and ensure only genuine Laser-
world spare parts are used in any service repairs.
Errors and omissions excepted and products are subject to change.
Laserworld (Switzerland) AG
Kreuzlingerstrasse 5
8574 Lengwil / SWITZERLAND
Registered office:
8574 Lengwil / Switzerland
Company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
CEO: Martin Werner
VAT no. (Switzerland): 683 180
UID (Switzerland): CHE-113.954.889
VAT no. (Germany): DE 258030001
WEEE-Reg.-No. (Germany): DE 90759352
www.laserworld.com
info@laserworld.com
representative according to EMVG:
Ray Technologies GmbH
Managing Director: Martin Werner
Mühlbachweg 2
83626 Valley / Germany
15 / 45