Hilti UD 16 Mode D'emploi page 20

Do not use the power tool where there is a risk of fire or explosion.
2.2 Chuck
Keyless chuck or
Key chuck with key
2.3 Switches
en
Control switch with electronic speed control
Lockbutton for sustained operation
Function selector switch
Forward / reverse switch
2.4 Grips
Vibration-absorbing side handle with depth gauge
Vibration-absorbing grip
2.5 Possible applications
UD 16 applications
Drilling in metal
Drilling in wood
Driving
Mixing dispersion paint, thin
cement mortar, tile adhesive and
plaster with mixing paddles
UD 30 applications
Drilling in metal
Drilling in wood
Driving
2.6 Items supplied as standard
1 Power tool with side handle
1 Depth gauge
1 Chuck key (with keyed chuck)
16
Insert tool type
Drill bits with smooth
shank
Stepped drill bits
Twist drills
Forstner drill bits
Hole saws
Auger bits
Flat bits
(not self-cutting)
Drywall screws
Frame anchors (HRD)
Universal anchors
(HUD)
TE‑MP 80
TE‑MP 110
Insert tool type
Drill bits with smooth
shank
Stepped drill bits
Twist drills
Forstner drill bits
Hole saws
Auger bits
Flat bits
(not self-cutting)
Drywall screws
Drill bit sizes, 1st
gear
Max. 13 mm
Max. 35 mm
Max. 30 mm
Max. 40 mm
Max. 80 mm
Max. 30 mm
Max. 40 mm
6/300 mm
10/50 ‑ 120 mm
12/60 mm
Recommended
Recommended
Drill bit sizes, 1st
gear
Max. 13 mm
Max. 35 mm
Max. 25 mm
Max. 40 mm
Max. 50 mm
Max. 20 mm
Max. 30 mm
6/60 mm
Drill bit sizes, 2nd
gear
Max. 6 mm
Max. 10 mm
Max. 30 mm
Max. 40 mm
Max. 40 mm
-
Max. 40 mm
-
-
-
-
-
Drill bit sizes, 2nd
gear
1.5...8 mm
Max. 8 mm
Max. 20 mm
Max. 25 mm
-
-
Max. 30 mm
-