Connection To Power Supply; How To Use - Hendi Arktic 232903 Mode D'emploi

6.4. MINIMUM DISTANCE FROM WALLS
In order to ensure proper operation of the appli-
ance, during the installation remember to ensure
minimum distance from walls in accordance with
the drawings below. Remember to ensure the ap-
propriate amount of space in front of the appliance
as well - it is necessary for easy opening of the cool-
ing/freezing chamber doors.

6.5. CONNECTION TO POWER SUPPLY

The connection to the power source must be made
by trained and qualified service technicians. The
power cable is supplied with the cooling/freezing
Prior to making the connection, make sure:
• The supply voltage corresponds to the appliance
voltage of 230 V / 50 Hz / 1 ph. Proper operation of
the appliance requires that the voltage should be
within ± 6% of the rated voltage.
• The electrical system used to power the appliance
must be suitable for rated parameters of the ap-
Connection stages:
• Install the thermomagnetic circuit breaker suita-
EN
ble for rated output power of the appliance to be
installed.

7. HOW TO USE

7.1. PLACING TRAYS AND CONTAINERS IN THE REFRIGERANT'S/FREEZER'S CHAMBER
Never stack food items on top of each other. Divide them evenly on the tray or GN container.
8
600 600 600
FRONT
counter. A thermomagnetic circuit breaker (field
supply) must be installed between the socket and
the power cable of the appliance.
pliance to be installed.
• The electronic system connected to the counter
complies with applicable requirements. Electrical
connections and installation of the thermomag-
netic circuit-breaker have been performed by a
qualified person.
• Connect the counter to the output on the thermo-
magnetic circuit breaker.
• Make sure the counter is operational (signalled by
an indicator lamp).
600 600
SIDE