Rane Seventy-two Guide D'utilisation page 6

1. Touchscreen: This full-color multi-touch display shows information relevant to Seventy-Two's
current operation. Touch the display and use the hardware controls to control the interface. See
Operation > Touchscreen
2. Shift: Press and hold this button to access secondary functions of other controls on Seventy-
Two.
3. View/Menu: Press this button to toggle to Library View and Waveform views on the touchscreen.
See Operation > Touchscreen
Hold Shift and press this button, or press and hold this button for 4 seconds, to show
Seventy-Two's Main Menu.
4. Effects/Tap: Press this button to show the Effects View immediately.
Hold Shift and press this button multiple times at the desired tempo to manually set the BPM rate
for beat-tempo effects, per channel.
5. Back: Press this button to view the previous screen. In Library View, press this button to move
back through levels of library organization.
Hold Shift and press this button to open the Prepare Area in Serato DJ Pro.
6. Load/Scroll: Turn this knob to browse through lists and press it to select an item or load the currently
selected track to the deck. When in Waveform View, touch this knob to switch to Library View in the
touchscreen.
Hold Shift and press this knob to load the currently selected track to the Prepare Area.
Tip: Press this knob twice quickly to load the same track to both decks ("instant doubles").
7. Deck Source: Set this knob to the desired audio source from this channel: USB A or B (a track
playing on that layer in the software), PH/CD (a device connected to the Deck PH/CD In on the
rear panel), or Aux (a device connected to the Deck Aux In on the rear panel).
Note: If you select PH/CD, set the PH/CD selector switches on the rear panel properly.
Note: A deck's controls will send MIDI information only when its deck source selector is set to
USB A or B.
8. Deck Level: Turn this knob to set the pre-fader, pre-EQ audio level of the corresponding
channel. The meter next to this knob indicates the signal's volume level (reduce it if it begins
"clipping," reaching the red part of the meter).
9. Deck EQ High: Turn this knob to adjust the high (treble) frequencies.
10. Deck EQ Mid: Turn this knob to adjust the mid-range frequencies.
11. Deck EQ Low: Turn this knob to adjust the low (bass) frequencies.
12. Deck LP/HP: Turn this knob to adjust the filter applied to the deck. Turn the knob
counterclockwise to apply a low-pass filter. Turn the knob clockwise to apply a high-pass filter.
Set it to the center ("12:00") position to deactivate the filters.
13. Pad Mode Buttons: Press one of these buttons to enter the corresponding pad mode. Press
once to enter the primary (printed above) mode, and press a second time to enter the
secondary (printed below) mode. Press Shift and one of these buttons to access custom pad
modes. See Operation > Pad Modes
14. Performance Pads: These pads have different functions on each deck depending on the
current pad mode. Use the Pad Mode Buttons to select the pad mode. These pads are
velocity-sensitive (in certain modes only), durable, and easy to play. See
Modes to learn how to use the pads in each mode.
15. Parameter /: Use these buttons for various functions in each pad mode. Press and hold
Shift and use these buttons to access secondary parameters.
6
for more information.
for more information.
to learn how to use the pads in each mode.
Note: All EQ and
Filter controls are full-
kill.
Operation > Pad