Rane Seventy-two Guide D'utilisation page 4

Setup
Items not listed under
1. Visit dj.rane.com
In your account, register your Seventy-Two and download the Rane Control Panel.
Windows users only: The Rane Control Panel contains drivers required for Windows.
2. IMPORTANT: Occasionally, we may update Seventy-Two's firmware to improve its
performance. Visit
update your software (firmware updates may address new software features).
3. Download and install the latest version of Serato DJ Pro from serato.com.
4. Using USB cables, connect the USB ports on the Rane Twelve (if using) or other USB MIDI
controllers to the Twelve/Controller USB ports on Seventy-Two.
5. Connect audio input sources (microphones, turntables, etc.) to Seventy-Two.
6. Connect audio output devices (headphones, power amplifiers, loudspeakers, etc.) to Seventy-
Two.
7. Connect all devices to power outlets, and power on the devices in proper order:
• When starting a session, turn on (1) input sources, (2) Seventy-Two, (3) output devices.
• When ending a session, turn off (1) output devices, (2) Seventy-Two, (3) input sources.
8. Using a USB cable, connect the USB port on Seventy-Two to your computer. Open Serato DJ Pro
and go! For more information on how to use Serato DJ Pro with Seventy-Two, visit
support.serato.com
Rane Twelve
(or other USB MIDI controller)
Powered Loudspeakers
4
Introduction > Box Contents
and log into your account. (Create an account if this is your first Rane product.)
dj.rane.com to check for available firmware updates, especially after you
and select Rane Seventy-Two.
Computer
Booth Monitors
are sold separately.
Microphone
Turntable
Rane Twelve
(or other USB MIDI controller)
CD Player