Philips HR2370 Guide D'utilisation page 14

6 Press the shaping disc through the opening of the shaping disc holder,
and then assemble the holder on the mixing chamber outlet.
holder clockwise to firmly lock it in place.
Always attach the shaping disc on the mixing
chamber outlet before you assemble the shaping disc
holder. Never put the shaping disc in the shaping disc
holder and assemble them on the mixing chamber
outlet at the same time.
7
Attach the lid onto the mixing chamber.
Note:
• If the mixing chamber lid is not properly installed,
the safety switch will prevent the appliance from
working.
English
14
Turn the
2
1
1
2