Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONS SETTING
To access to functions setting, press the
UF-1 Internal value / display voltage
1. Press the
2. Press again the
3. To exit and return to normal weighing press the
UF-2 Weight limits
1. Press the
2. The display will show the message "0000.0L"
3. Use the keys
to increase the digit value.
4. Press the
5. The display will show "0000.0H"
6. Use the keys
7. Press the
UF-3 Auto-turn off
Modes:
-
AoFF 00 – Auto-turn off disable.
-
AoFF 01 – The balance will automatically turn off after 1 minute of non use.
-
The auto-turn off can be configurated up to 99 minutes AoFF01~AoFF99, the default
value is AoFF10 (10 minutes)
1. Press the
2. Use the keys
to select the desired mode.
3. Press the
key to view the internal value.
key to view the battery voltage.
key to access to weight limits configuration.
and
to introduce the low limit value, with key
key to confirm.
and
to introduce the high limit value, with key
key to confirm.
key to access to auto-turn off configuration.
and
to move from one digit to other and the key
key to confirm.
and
key.
key.
7
Publicité
Table des Matières
