Peg-Perego Culla Pop-Up Notice D'emploi page 13

• WARNING: Do not let other
children play unattended near the
carry cot and stand.
The images referring to the textile details may
differ from the collection purchased.
Instructions for use
1• OPENING THE Culla Pop Up: Turn the handle of the Culla
Pop Up upwards;
2• unhook the two Velcro straps on both sides as shown (Fig.
a, arrows a) and lift the Culla Pop Up upwards with the
handle (Arrow b);
3• To open and lock the base in the open position, move
the sliders from the centre of the base towards the two
extremities (Fig. c) until they click into place (Fig. d);
4• close the Velcro straps on both sides of the Culla Pop Up.
5• HOOD: the hood comes with 6 side buttons (Fig. a);
moreover, on opening the zip, a mesh insert allows the
parent to monitor the baby (Fig. b).
It is possible to extract a portion of fabric from the hood
in order to protect the child against the sun (fig_c); this
can then be easily repositioned in the hood when it is no
longer required.
6• COVER: place the cover over the Culla Pop Up; fasten the
buttons on both sides and the elastics as shown in the
figure.
The cover has different characteristics depending on the
collection.
The rubber bands that fasten to the hood allow the cover
to provide greater protection to the child against the
elements.
7• HANDLE: the handle is only locked in the vertical position
(Fig. a).
To lower the handle, press the two side buttons
simultaneously and push it downwards (Fig. b).
The handle is useful to carry the Culla Pop Up and fasten it
onto the chassis (Fig. c).
8• ROCKING POSITION: the base of the Culla Pop Up has a
special shape that allows you to rock your child when
placed on a flat surface.
9• SLEEPING POSITION: To turn the Culla Pop Up into a non-
rocking cradle, extract the 4 feet positioned under the base.
10• ADJUSTING THE BACKREST: thanks to the special COMFORT
SYSTEM, you can adjust the backrest into 3 positions.
Just pull the strap towards you, as shown, and position it as
you please.
11• CLOSING THE Culla Pop Up: The Culla Pop Up can be
closed to reduce its bulk. Press and push the tabs of the
sliders beneath the base of the Culla Pop Up (Fig. a) and
move them simultaneously towards the center of the base
(Fig. b).
12• Rotate the handle downwards, pressing the two side
buttons simultaneously (Fig. c).
Fasten the Velcro straps on both sides, to keep the Culla
Pop Up closed (Fig. d).
Ganciomatic system
13• The Ganciomatic System is a fast and practical system that
allows you to fasten the Culla Pop Up to the Ganciomatic
attachments of the stroller or chassis.
To fasten the Culla Pop Up, position it on the chassis and
press down with both hands until it clicks.
Always enable the brake on the chassis before fastening
and unfastening the bassinet.
Ensure the Culla Pop Up is properly fastened.
• To release it, pull the lever on the Ganciomatic handle
(arrow_a) and lift the Culla Pop Up.
Removing the padding
14• To remove the padding of the Culla Pop Up:
_ Unbutton the cover and remove it
_ Inside the Culla Pop Up, unbutton the two buttons
attached to the handle (Fig. a) and open the two zips as
shown in figures b and c, in order to remove the padding.
15• Lift the padding to unfasten the two sides of the strap from
the bodywork (fig d) and remove them (fig e).
16• Remove the mattress and take off the mattress case.
17• It is also possible to remove the product's inner lining.
13