Function/Operation; Setting The Operating Mode - Arbonia FKS Série Instructions D'utilisation Et De Montage

1.3 Cleaning
W Disconnect the device from the power sup-
ply before cleaning or maintenance.
W
Use only mild, non-scouring cleaning
agents.
1.4 Complaint
Please contact your specialist.
1.5 Installation and repairs
Only allow specialists to carry out installati-
on and repair work to prevent any warranty
claims from being rendered null and void.
1.6 Disposal
Dispose of the unit in the
separate collection for elec-
trical and electronic devices.
Observe local regulations.
09/2018

2. Function/Operation

Fig. 1: Operating elements
1
1 Switch On/Off
2 Temperature control
Room temperature approx. 7 - 27 °C
Radiator temperature approx.
40 - 65 °C
3 Scale of the temperature control
4 Boost button
5 LED light ring
2.1 Commissioning
The on/off switch (1) can be used to disconnect
power supply to the device, for example outsi-
de the heating period.

2.2 Setting the operating mode

In the as-delivered condition, the thermost-
at is programmed for regulating the room
temperature. If regulation of the radiator
temperature is desired that is independent of
the room temperature (e.g. because the room
temperature is regulated via panel heating),
take the following steps:
W Switch off device. Set the on/off switch (1)
to "0".
Function/Operation
3
2
4
5
Thermostat FKS
9