Getting Started With Your Appliance; Touch Control - Thermador T24UR925LS Guide D'utilisation Et D'entretien

Getting started with your appliance

Touch control

A
B
A.
ON/OFF
The first time the appliance is plugged, it will
automatically start and all functions will be
enabled.
• Press and hold the ON/OFF for 3 seconds to
enter off mode, which will disable the functions
and stop all operations from the appliance.
• Press and hold the ON/OFF for 3 seconds to
enable the functions and start the normal
operation of the appliance.
B.
ALARM
When the door has been left open for 2 minutes or
longer, an audible alarm sound is triggered in addition
to a flashing blue LED indicator light above the
ALARM button. Press the button once to temporarily
disengage the ALARM or close the open door.
• Press and hold the ALARM button for 3 seconds to
disengage permanently the
function. The key-press will sound once, confirming
the ALARM function has been disengaged.
• Press and hold ALARM for 3 seconds to reengage
the door-open ALARM function.
NOTE: The ALARM function will not operate when the
unit is in Sabbath mode. See the Sabbath Mode
section in this same page.
C.
LOCK
• Press and hold the LOCK button for 3 seconds,
LOCK LED will light up and all buttons will be blocked.
To disengage, press and hold the LOCK button for 3
seconds or until LOCK LED light goes off.
D.
SABBATH
The Sabbath Mode is designed for those users whose
religious observances requires the turning off of lights
or for travelers who will be absent from home.
This appliance is certified by Star-K to meet strict
religious regulations in conjunction with specific
instructions found on www.star-k.org.
C D E
door-open ALARM
G H I
F
When Sabbath mode is activated:
•The display panel will indicate the unit is in Sabbath
mode.
• All other interior and exterior lights deactivate and
cannot be engaged.
• All control buttons become inactive except the
ON/OFF button.
• All audible and visual alarms become inactive.
Activating:
1. Press and hold Sabbath for 3 seconds to start the
Sabbath mode.
2. The key-press will sound once and the Sabbath
light will turn on and the display will show SAB for
a few seconds.
The light will not turn off even if the door is closed as
long as the unit remains in Sabbath mode.
Deactivating:
1. Press and hold Sabbath for 3 seconds.
2. All buttons, displays, lights and alarms will again
become functional.
E.
LIGHT
Light location is hidden/recessed in ceiling. There are
4 adjustable light settings: no light (no LED light on
control), low (1 LED lite on control), medium (2 LED
lite) and high (3 LED lite on control).
When the door is open, the interior lights automatically
adjust to the maximum intensity (high); lights return to
the selected intensity when the door is closed.
When the lights are already set on high, there will not
be a difference of intensity when the door is open.
F.
°F / °C
• Press and hold the °F / °C button to switch between
the degrees Fahrenheit and degrees Celsius for the
temperature on the display.
The factory setting is degrees Fahrenheit. When
changing to degrees Celsius (°C) the display will show
°C until switched back. When switching back to
degrees Fahrenheit (°F) the display will show °F.
K
J
Page | 7