Hose Selection (Optional); Select A New Product (If Required) - FMC Technologies Sening MultiFlow Manuel D'utilisation

MultiFlow  Quick Start
Pos : 12.9 /T echD OC/Seni ng/09-MultiFl ow/D OK-392_Kurzanleitung Fahrer /| H05---> Sc hlauc hweg evorwahl (opti onal) @ 3\mod_1355823055201_19.doc x @ 68868 @ @ 1
5
.

Hose selection (optional)

Pos : 12.10 /Tec hD OC/Sening/09-M ultiFlow/DOK-392_Kurz anl eitung F ahrer/Q05 - Sc hlauc hweg evor wahl (optional) @ 3\mod_1355824969513_19.doc x @ 69351 @ @ 1

In software versions lower than 3.10 the
electronic hose selection will be carried out
before product selection.

Now the hose selection menu is displayed. The
hose selected earlier is marked.

If necessary change the selection by using the
keys <F1> or <F2> and select the hose with
<Enter>

You can also select the hose by entering the
preceding number.

With <Stop> you can quit the selection menu at
any time.
Pos : 12.11 /Tec hD OC/Sening/09-M ultiFlow/DOK-392_Kurz anl eitung F ahrer/| H06---> Neues Pr odukt wählen ( bei Bedarf) @ 3\mod_1355824841216_19.doc x @ 69006 @ @ 1
6
.

Select a new product (if required)

Pos : 12.12 /Tec hD OC/Sening/09-M ultiFlow/DOK-392_Kurz anl eitung F ahrer/Q06 - N eues Pr odukt wähl en (bei Bedarf) @ 3\mod_1355824985029_19.doc x @ 69397 @ @ 1

The actual input line is marked by pointed brackets (>XX<).

Correct the input fields. Confirm all entries with <Enter>. This takes you automatically to
the next input field. The last input field is followed by the first one again.

First step:
Specify the product which is identified by its product code. (Parameters: product page
and index).

If you do not know the product code, select the desired product with <Enter>.

A 3-page selection list of all products then appears automatically which you can open
with <Enter>. (With <Stop> you go back.)

Select the desired product with <Enter>.


Second step:
Enter the required discharge quantity. The selected volume must be larger or equal to the
minimum discharge volume (cf. parameter list: e.g. 200 L).

Now you enter price and customer ID in case these options are activated.

Should you have made an input error, you can overwrite the faulty value by a new entry,
or you can delete the character to the left of the cursor with the key <F2> ('Clear').
8
The selection is now accepted into the discharge settings.
MN F09 012 US  DOK-392E  Issue/Rev. 2.01 (01/13)
H o s e S e l e c t i o n
S e l e c t i o n :
1 U n m e t e r e d
2 W e t h o s e 1
3 W e t h o s e 2
4 D r y h o s e
5 B y p a s s 1
6 B y p a s s 2
U p D o w n
®
Sening is a registered trademark of FMC Technologies
- - -