Stop Watch Function - TFA 38.2030 Mode D'emploi

TFA_No. 38.2030 Anleitung_04_13
Stop watch
• Press the START/STOP button to adjust the minutes.
• Press the MODE button to confirm the settings.
• The current time appears on the display, the
alarm symbol and the icon of the day-of-the-
week is highlighted.
• When the alarm time is reached, the alarm will ring.
• If the alarm
LAP/SET/RESET button, the alarm sound will
automatically turn off after a few seconds and
will be reactivated at the same time.
• Press the START/STOP button and the snooze
function will be activated. The alarm sound will
be reactivated after 5 minutes.
• Press the LAP/SET/RESET and the START/STOP
buttons at the same time to activate/turn off the
alarm function.
• The alarm symbol appears/disappears on the dis-
play.
• Press the LAP/SET/RESET button while in normal
mode to change between the time and the alarm
time.
5.3 Hourly chime
• Press and hold the LAP/SET/RESET button while in
normal mode.
• The adjusted alarm time appears on the display.
• Press the MODE button at the same time to acti-
vate the hourly chime.
• Under all the icons of the day-of-the-week black
highlights appear.
• The hourly chime is now activated.
• To deactivate the hourly chime, press and hold
the LAP/SET/RESET button and press the MODE
button at the same time to deactivate the func-
tion.
• The black highlights disappear.
12
26.04.2013
is not stopped with
11:03 Uhr Seite 7
Stop watch

5.4 Stop watch function

• Press the MODE button while in normal mode to
enter the stop watch mode. In the stop watch
mode the black highlights are flashing.
• With the START/STOP button you can start and
stop the countdown.
the
• Press the LAP/SET/RESET button to clear the
countdown.
• The total countdown will be 29 minutes and
59,99 seconds and the indication of the counted
time will be in 100th of a second interval.
• After the first 30 minutes the clock will
automatically switch to one second increment.
• After that, the smallest unit will no longer be
100th of seconds but only full seconds.
5.4.1 Split time measurement
• Press the START/STOP button to activate the stop
watch. Press the LAP/SET/RESET button and the
elapsed time will be displayed. The stop watch is
running in the background and by pressing the
LAP/SET/RESET button again, the current time
appears on the display. With this function, it is
possible to measure any number of split times
from the start.
5.4.2 Storing the split time
• Start the stop watch with the START/STOP but-
ton. If the first runner arrived at the destination,
press the LAP/SET/RESET button and with the sec-
ond runner the START/STOP button. On the dis-
play you can read the time of the first runner
and by pressing the LAP/SET/RESET button the
time of the
LAP/SET/RESET button again to clear the values.
second runner. Press the
13