Charging The Printer Battery - SKF Maintenance Products TMEA 1P/2.5 Mode D'emploi

The display first shows 'S donE',
then 'P' upon which printing
commences.
When the measurement data has
been transferred to the printer
memory, 'P donE' will be
displayed. To keep record of your
alignment report, make a copy of
the thermal print out on normal
paper.
Note! Paper feed
To advance the paper, press and
hold the front button of the printer.
3.10.3 Charging the printer
battery
The printer is powered by a
rechargeable battery.
Recharge the battery either if the
printer does not turn on and its
indicator is not illuminating, or
when the print out quality
becomes faint. TMEA 1PEx is
provided with an adapter to
recharge the printer battery.
30
Fig. 30. Printer
A Cable connection
B Adapter connection
C ON/OFF switch
D Red indicator
E Front button
Shaft Alignment Tools TMEA 1P/2.5 / TMEA 1PEx