SKF Maintenance Products TMEA 1P/2.5 Mode D'emploi page 16

Technical data
Printer unit (TMEA 1PEx system)
Printing system
Paper feed
DIP switches position
Power
Operation time
Adapter for charging the battery
Continental European adapter
North American adapter
UK, Australian adapter
Length of connection cable
Paper type
Operating temperature
Operating humidity
Dimensions
Weight
Complete system
Shaft diameter range
Accuracy of system
Temperature range
Operating humidity
Carrying case dimensions
Total weight (incl. case)
TMEA 1P/2.5
TMEA 1PEx
Calibration certificate
Warranty
16
Thermal dot matrix
Friction
1 2 3 4 5 6 7 8
0 1 0 0 1 1 0 0
rechargeable battery - 12 V max.
60 minutes continuous operation with
fully charged battery
DC 12 V to 15 V - 400 mA (min.)
DC 12V - 500 mA
DC 12 V - 1.25 A with detachable
primary plugs for UK and Australia
1.5 m
Standard thermal printer roll,
20 m x 112 mm, diameter 41.5 mm
(65 ft x 4.4 in, diameter 1.6 in)
5 - 35 °C (41 - 95 °F)
20 - 70%
165 x 135 x 50 mm (6.5 x 5.3 x 2.0 in)
670 gr with 20 m paper roll
(1.5 lb with a 65 feet paper roll)
30 - 500 mm (1.2 - 20 in)
Better than 2%
0 - 40 °C (32 - 104 °F) without printer
< 90% without printer
534 x 427 x 157 mm
(21.0 x 16.8 x 6.2 in)
7.9 kg (11.4 lb)
8.9 kg (19.6 lb)
valid for two years
12 months
Shaft Alignment Tools
OFF = 0, ON = 1
TMEA 1P/2.5 / TMEA 1PEx