Lens Mounting; Mounting Of The Video Cable; Mounting Of The Camera - Abus PROFILINE TVCC50021 Manuel Utilisateur

6.2 Lens mounting

The camera is designated for lenses with CS-Mount. A lens with C-Mount can be
mounted with the enclosed lens adapter ring.
Before a lens with C-Mount can be mounted, please make sure that the lens adapter
ring is mounted on the camera. Otherwise you may damage the image sensor.
For lenses with DC-drive the connector for the lens cable is on the right side of the
camera. The lens type is identified automatically by the camera. A lens with DC-drive
is recommended for an optimal image quality.
Back-Focus adjustment:

6.3 Mounting of the video cable

To connect the video signal of the camera with a monitor or recorder, use a coaxial cable of the
type RG59 with BNC-Connector (male) at the "VIDEO" connector.
The cable length up to the next device should not rise 100 meters.

6.4 Mounting of the camera

For the mounting of the camera, mount the provided socket at the upper or underside of the
camera. For this the plate is aligned with the already predefined screw openings and fastened with
the enclosed screws.
ATTENTION!
During the assembly the camera must be separated from the mains voltage.
CAUTION!
The camera should not be positioned with opened iris towards the sun. This can lead
to the destruction of the sensor.
31