Power Failure - Sangean WR-2 Mode D'emploi

Mute the radio
Press MUTE button on the remote control to mute the radio.
Press MUTE button again or power on/off or volume control to
release the muting.

Power failure

The clock will continue to run 6 minutes during power failure while
preset stations can last for approx. an hour. After that, you should
reset the radio and preset stations.
Specifications
Frequency Coverage:
FM 87.50 – 108 MHz
AM 520 – 1710 kHz (10 kHz version) or
MW 522 – 1629 kHz (9 kHz version)
Powered: AC 120V/60Hz/24W or AC 230V/50Hz 24W
Internal Antenna system:
AM built-in ferrite antenna
FM built-in wire antenna
External antenna terminal:
AM antenna terminal (USA version only)
FM F-type antenna terminal
23