Installing The Weather Station On The Digital Picture Frame - Hama 00095266 Mode D'emploi

Installing the weather station on the digital picture frame

GB
44
1. Connect the indoor sensor to the appropriate plug socket.
2. Connect the outdoor sensor to the main device.
Once the batteries have been inserted, the main device
automatically receives data about the outdoor
temperature from the outdoor sensor.
The battery compartment is on the rear of the outdoor
sensor. Unscrew the screws in order to open the battery
compartment.
NOTE:
► After the appropriate batteries (2 x 1.5V AAA LR03) have been
inserted, the LED blinks and the outdoor sensor is ready for
use. Inserting the batteries with incorrect polarity will result in
damage to the product.
CAUTION:
► Do not place the outdoor sensor in or under water. Position the
device in a location protected from rain and direct sunshine.
The maximum transmission range between the outdoor sensor
and the indoor weather station is approx. 12 m (approx. 60 m in
open spaces).
► We recommend installing the outdoor sensor on a north wall of
your building. Further, please avoid placing the sensor close to
materials that could block the signal (e.g. walls with steel rein-
forcement), as this can negatively affect the range of the device.