Programmes; Information For Test Institutes; Settings - Electrolux ESF5206LOW Notice D'utilisation

5. PROGRAMMES

Programme
2)
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (Also, it is a standard programme for test insti‐
tutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in
a short period of time.
4) Use this programme to quickly rinse the dishes and to prevent the food remains from dry‐
ing out on the dishes and to reduce bad odour coming out from the appliance. Do not use
detergent with this programme.
5.1 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
Degree of soil Programme
Type of load phases
Normal soil • Pre-wash
Crockery and • Wash 50 °C
cutlery • Rinses
• Dry
Heavy soil • Pre-wash
Crockery, cut‐ • Wash 70 °C
lery, pots and • Rinses
pans • Dry
Normal soil • Pre-wash
Crockery and • Wash 65 °C
cutlery • Rinses
• Dry
Fresh soil • Wash 60 °C
Crockery and
cutlery • Rinses
All • Pre-wash
Consumption values
1)
Duration
(min)
222
155 - 170 1.5 - 1.7
130 - 140 1.4 - 1.6
30
or 65 °C
14
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
• The level of water softener according
to the water hardness.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
ENGLISH
Energy Water
(kWh) (l)
1.039 11
14-15
15-17
0.8 10
0.1 5
7