Listening To A Cassette Tape (Tape 2) - Sharp CD-BK300W Mode D'emploi

Listening to a Cassette Tape (TAPE 2)

1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1
E-21 ENGLISH
2) button to select TAPE 2.
Sound Control (See page 12.)
3
Open the cassette door by pushing
the area marked " PUSH EJECT".
4
Load a cassette into the TAPE 2 cas-
sette compartment with side A facing
you.
5
Press the button to choose one
side or both sides.
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the ( ) button to listen to side A, or the
B.
To play both sides ( ), start from side A. When playback starts from side B, side
A will not be played.
To stop playback:
Press the button.
Fast forward/rewind on side A:
To advance the tape, press the PRESET
rewind it, press the PRESET
Fast forward/rewind on side B:
To advance the tape, press the
rewind it, press the PRESET
Caution:
z To remove the cassette, press the
z Before changing from one tape operation to another, press the
z If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until power is restored.
button for side
(PRESET / ) button. To
( PRESET / ) button.
PRESET ( PRESET / ) button. To
(PRESET / ) button.
button, and then open the compartment.
button.