Joyello JL- 993 PAPPA-RE Mode D'emploi page 8

GB JL-993/JL-994
WARNING: before using the product, make sure the booster seat is correctly fixed on the
chair to prevent it from moving.
8
7. Adjust the height of the booster seat and then use harness "E"
to loop under the seat and lock the buckle (Fig.7a). Pull the end
of the harness to tighten (Fig.7b).
8. Use the backrest locking harness "D" to loop around at
back of the chair and lock the buckle (Fig.8a). Pull the
end of the harness to tighten it (Fig.8b).
9. (Optional) Insert the two plastic hooks "F" of
the tray into the armrest slots "3" (Fig.9a). Turn
the tray up to 180° and insert the buttons into
the housings (Fig.9b). To support the front tray
more stable, turn down the plastic bar "I" under
the front tray to 90° and fix it into the booster
seat (Fig.9c-9d).
10. (Folding the product):
• Release all safety belts
• Lift the handle up and simultaneously push down
the back in the closed position (Fig.10b).
• Push simultaneously the two buttons "A" placed
under the armrests and lower the backrest at the
same time (Fig.10b).
• The product now is possible carry in the bag for
easy transportation.