Joyello JL- 993 PAPPA-RE Mode D'emploi page 7

2. To adjust booster seat height, push the two red buttons on the side, and pushing down the legs to
adjust different heights (Fig.2).
IMPORTANT: MAKE SURE THE RED BUTTONS ARE POP OUT BEFORE USE.
5. Lower the backrest and turn the booster seat upside down (Fig.5). Run the harness "E" from the
right to the left side as Fig.5 and Fig.5b. Follow the sequence from Fig.%c to Fig.5f to insert harness
"E" on both right and left side of the seat.
6. Please the booster seat on the center of the chair and make sure that the
chair is larger than the booster seat ase (<30cmL x 31cmW).
3. Fix the buckle correctly till you hear a "click" (Fig.3a-3b). The
waist strap "B" could be adjusted according to the child when
sitting on it.
IMPORTANT: Always use the secure system when the
child sits on it.
4. Run the backrest locking harness "D" into both D rings of the
waist strap "B" (Fig.4a-b).
JL-993/JL-994 GB
7