Before Use; Cautions Regarding Handling; Safety Instructions - JB Systems MCD 580 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems
product. To take full advantage of all possibilities, please read these
operating instructions very carefully.
FEATURES
 Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)
o MPEG1 layer3 (32 + 44,1 + 48kHz)
o MPEG2 layer3 (16 + 22,05 + 24kHz)
o MPEG2.5 layer3 (8 + 11,025 + 12kHz)
 Supports both CBR and VBR bitrate modes.
 Reads CD-DA, CD-R, CD-RW
 Anti-shock Memory 10seconds
 Seamless loop
 Instant start
 1/75sec Frame search, also on MP3
 Pitch ranges: +/-8% +/-12% +/-16%, also on MP3
 Pitch bend on jog wheel and buttons for perfect mixes
 Fader start/stop (back cue)
 Auto cue function (-48dB)
 4 different speed scan
 Selectable elapsed, remain and total remain time display
 Pitch display.
 Single/continuous play
 Relay play allows consecutive playback on two decks
 S/PDIF digital output on RCA/cinch
 60 seconds Transport Protection
 20 tracks program play

BEFORE USE

Check the contents:
Check that the carton contains the following items:
 Main unit
 Control unit
 Operating instructions
 Pair of cinch cords
 1 mini-DIN8 cable
 Pair mono 3.5mm jack cables for fader starts
JB SYSTEMS®
USER MANUAL
1/47
MCD580
ENGLISH

CAUTIONS REGARDING HANDLING

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove
CAUTION
the top cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be
placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Minimum distances around the apparatus for sufficient ventilation is 5cm.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 When the power switch is in OFF position, this unit is not completely disconnected from the mains!
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
JB SYSTEMS®
USER MANUAL
This symbol means: Safety Class II
appliance
2/47
MCD580

Publicité

Table des Matières
loading

Table des Matières