Korg Wi-Tune Manuel D'utilisation page 6

1. Remove the clip that's attached to the
Transmitter, then gently press down and
slide the battery case cover on the near
panel of the Transmitter to remove it.
2. Properly orient the battery and insert it into
the unit.
3. Reattach the battery cover on the Transmit-
ter.
Attaching and removing the
supplied clip/strap on the
Transmitter
Insert the clip or strap into the clip attachment
groove on the Transmitter and slide it in all the
way. Make sure that you insert the clip or strap
in the correct orientation.
6
To remove the clip or strap, hold the Transmit-
ter securely and slide the clip or strap while
holding it by its sides.
When you attach the clip do not touch the
connectors on the Transmitter.
Do not pull the clip by grasping the
pinching portion of the clip. Otherwise, the
clip or strap may break.
When you attach the clip or strap, be sure
to slide it in all the way until it is locked,
then make sure that it's secure.