Safety Regulations; Layout; Proper Use; Technical Data - EINHELL BT-MX 1400 E Mode D'emploi

Anleitung BT-MX_1400E_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Additional safety instructions
The equipment must never be used in
surroundings where an explosive atmosphere
exists. Never mix in solvents or substances
containing solvent that have flashpoints below
21°C.
Do not let the cable touch any parts of your body.
Only use the extension cable approved for use in
the working area.
The unit must only be started and stopped when
it is inside a mixing vessel. Ensure that the mixing
vessel is placed on a solid, secure base.
Never reach into the mixing vessel with your
hands or any other object during the mixing
process.
When working with the mixer, we recommend
that you wear work gloves, goggles and ear
protectors.
Wearing close-fitting clothes is mandatory.
Always allow for reaction torque
Take the reaction torque into account. During
operation always hold the equipment firmly in
both hands.
12
20.01.2009 15:02 Uhr Seite 12
2. Layout (Fig. 1/2)
1. On/Off switch
2. Locking knob
3. Speed control
4. 1st gear / 2nd gear switch
5. Mixer holder
6. Mixer

3. Proper use

The machine has been designed to mix liquid and
powderery building materials such as paint, mortar,
adhesive, plaster and similar substances. The
relevant mixing action (which depends on the
consistancy of the materials and the quantity that has
to be mixed) must be set up for the appropriate
mixing tool.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: 230 V ~ 50 Hz
Power input:
Idling speed: I 180-460/ II 300-700 min
Mixing tool mount:
Protection class:
Weight:
1400 W
-1
M14
II /
4.1 kg