Introduction; Designated Use - Janser 228 856 000 Instructions De Service

1

Introduction

BEPo UFS 115 N Twist is a milling cutter that allows working with different materials. It is
extremely easy to manage due to the possibility to turn the motor through a 180° angle to the
contact area.
There are totally new ways of working with different materials because of the enlarged range of
accessories especially developed for this milling cutter.
1.1

Designated use

BEPo UFS 115 N Twist is designed to cut and mill wood, metal, stone material without using
water.
Using the appropriate cutting tool, BEPo UFS 115 N Twist can be used for cutting off plaster and
tiles as well as for working on solid wood, plywood, chipboard, aluminium plates and various
plastics.
Only use the machine with the above mentioned materials according to the requirements
determined in the operating instructions.
20