Temperature Controller - Indel B TB46 STEEL SINGLE DOOR Instructions D'utilisation

ENGLISH

TEMPERATURE CONTROLLER

The Temperature Controller provides the ability to set the desired temperature level and displays information
on the cabinet and set temperature.
When your appliance is first connected to AC or DC input the digital read out will show the current cabinet
temperature, to adjust the temperature follow these steps:
To increase the cabinet temperature press
Once selected the display will flash a number of times before returning to the current temperature.
When press the above two buttons Set (compressor speed) and
switch the display between °C and °F.
22
INSIDE
ZONE
HIGH
MID ON
SET
OFF
LOW
BATTERY PROTECTION
and to decrease press
TB STEEL SINGLE DOOR
RUN
TEMPERATURE
MAX
SET
MIN
COMPRESSOR SPEED
until the desired level is reached.
(cooling) at the same time, it would
TB STEEL SINGLE DOOR_27-04-2018