Additional Required Items; Suggested Field Equipment And Supplies; Section 1: Building The Boat Stand - Horizon Hobby Pro Boat BLACKJACK 26 SS Manuel D'utilisation

Although the Blackjack 26 SS comes fully assembled and ready for action, you will need a few tools to get your boat ready to run. You will need
the following:
• Blue Thunder ™ 20% Fuel (quart) (DYN2320)
• 500cc Fuel Bottle (DYN2003) or
• Fast Tap ™ Quart Bottle Spout (DYN2009)
• Glow Plug Wrench (DYN2510)
• Ni-Cd Glow Driver (DYN1925)
In addition to the items needed to run the Blackjack 26 SS, we recommend that you carry the following in your fi eld box:
• Engine Tuning Screwdriver (DYN3048)
• Replacement Glow Plugs (DYN2508 or DYN2500)
• Hex driver/Allen wrench (2.5mm)
• Cable grease to lubricate drive shaft (PRB0100)
1. There are 4 plywood pieces. The 2 short plywood pieces are the
ends of the boat stand.
2. Attach the 2 long plywood pieces of the interlocking boat stand
to the end of one of the short plywood pieces. Repeat with the
remaining short plywood piece.
3. Secure the interlocking boat stand with thick CA or epoxy.
EN

Additional Required Items

Suggested Field Equipment and Supplies

Section 1: Building the Boat Stand

• 8 AA alkaline batteries (4 for the transmitter
and 4 for the receiver)
• 7.2V Battery (DYN1050) for electric starter
• Battery Charger (DYN4077) for electric starter
• Clean towels
• AA alkaline batteries
• Adjustable wrench (small)
• Extra propellers
4