Troubleshooting; Disposal; Ec Declaration Of Conformity - Fimap FB45 Manuel D'utilisation Et D'entretien

This chapter lists the most common problems linked with the use of the appliance. If you are unable to resolve the problems with the
information given here, please contact your nearest assistance centre.
PROBLEM
The appliance doesn't work
The appliance vibrates.
To dispose of the appliance, take it to a demolition centre or an
authorised collection centre.
Before scrapping the machine, it is necessary to remove and
separate out the following materials, then send them to the
appropriate collection centres in accordance with the environmental
hygiene regulations currently in force:
• Felt
• Electric and electronic parts*
• Plastic parts
• Metallic parts
(*) In particular, contact your local distributor when scrapping electric
and electronic parts.
The undersigned manufacturer:
FIMAP S.p.A.
Via Invalidi del Lavoro n.1
37059 Santa Maria di Zevio (VR)
declares under its sole responsibility that the products
AIR MOVERS mod. FB45 230V – FB45 115V
comply with the requirements of the following Directives:
• 2004/108/EC EMC
• 2006/42/EC MD
• 2011/65/UE RoHS
They also comply with the following standards:
• EN 60335-1: Household and similar electrical appliances - Safety.
Part 1: Generic standards.
• EN 60335-2-69. Safety of household and similar electrical
appliances - Part 2: Particular regulations for wet and dry floor
cleaning appliances, including motor-equipped brushes, for
industrial and commercial use
• EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2:
Limits – Limits for harmonic current emissions (equipment with
input current <= 16 A per phase)
• EN 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3:
Limits – Restriction of voltage variations,voltage fluctuations and
flicker in low voltage power supply systems for devices with a
rated current <= 16 per phase and not subject to conditional
connection
• EN 55014-1: Electromagnetic compatibility - Regulations for
household appliances, electrical devices and similar equipment
- Part 1: Emission

TROUBLESHOOTING

POSSIBLE CAUSE
The power cable is not connected to the
mains socket.
The main switch is in the "OFF" position.
The fan is blocked.
The air inlet or outlet nozzle is blocked.
Residues on the fan.

DISPOSAL

EC DECLARATION OF CONFORMITY

• EN 55014-2: Electromagnetic compatibility - Requirements for
household appliances, electrical devices and similar equipment
- Part 2: Immunity - Regulation for product family
• EN 62233: Household and similar electrical appliances
- Electromagnetic fields - Methods for evaluation and
measurement.
21
SOLUTION
Connect the plug of the power cable to the
mains socket.
Turn the main switch clockwise and select
one of the three operating speeds.
Remove the obstruction blocking the
rotation of the fan.
Remove the obstruction blocking the
nozzle.
Remove the residues on the fan.
The person authorised to compile the technical file:
Mr. Giancarlo Ruffo
Via Invalidi del Lavoro n.1
37059 Santa Maria di Zevio (VR) - ITALY
Santa Maria di Zevio, 09/02/2015
Legal representative
FIMAP S.p.A.
Giancarlo Ruffo