Preparation Of The Appliance; Handling The Packed Appliance; How To Unpack The Appliance; How To Transport The Appliance - Fimap FB45 Manuel D'utilisation Et D'entretien

HANDLING THE PACKED APPLIANCE

The appliance is delivered in specific packaging. These packaging
elements (plastic bags, clips, etc.) are potential sources of danger
are potential sources of danger and must be kept out of the reach
of children, incompetent persons, etc. The overall weight of the
appliance plus its packaging is 12 kg.

HOW TO UNPACK THE APPLIANCE

The procedure for removing the device from its packaging is the
following:
1. Open the outer box.
2. Remove the cardboard retainer.
3. Take the appliance out of the box.
4. Take the appliance out of the protective bag.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.

HOW TO TRANSPORT THE APPLIANCE

The procedure for the safe handling of the device is the following:
1. Take all necessary steps to ensure that the device is in a safe
condition (read the section "MACHINE
2. Insert the appliance into the protective bag, taking care not to
damage either during this operation.
3. Insert the appliance into the carton, taking care not to damage
either during this operation.
Remember to place the lower cardboard retainer at the bottom
of the box.

COMPONENT POSITIONING

The control panel components are identified as follows:
1. Lifting handle.
2. Housing for winding the power cable.
3. Shut-down timer knob.
4. Three-speed main switch knob.
5. Retainer blade knob.
6. Retainer blade.
7. Air outlet nozzle.
8. Air inlet nozzle.
1
2
1
9
10
5

PREPARATION OF THE APPLIANCE

SAFETY").
3
4
2
12
6
The dimensions of the package are as follows:
A : 465mm
B: 450mm
C : 435mm
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
ATTENTION: Since the packaging elements (plastic bags,
staples, etc.) are a source of danger they should not be left within
the reach of children, disabled persons, etc.
4. Insert the upper cardboard retainer.
5. Close the carton.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
9. Trolley handle button.
10. Trolley handle.
11. Transport wheels.
12. Support lever.
13. Power cable.
14. Power cable fastener.
5
6
7
3
5
6
7
18
11
8
4