Olimpia splendid PELER 4 Mode D'emploi Et D'entretien page 15

with time as follows: MED and LOW, alternatively.
LOW speed + NATURE mode:
Press the NATURE button when SPEED mode is LOW to set NATURE mode with LOW spe-
ed. Both LOW and NATURE indicators will be on. The wind speed will automatically change
with time as follows: LOW and MED, alternatively
SPEED button
1. When the POWER button is pressed, HIGH speed indicator "HIGH" will be on and the
strongest wind comes out.
2. Press the SPEED button once, the MED speed indicator "MED" will be on and the mild
wind comes out.
3. Now Press the SPEED again, the LOW speed indicator "LOW" will be on and the weak
wind comes out.
SWING button
Press "SWING "button to turn oscillation function on or off.
TIMER button
1. Press the "TIMER" button to adjust timer setting. Every press adds 30 minutes up to 7.5
hours. The set period is indicated on the display.
2. To clear timer mode, press "TIMER" button 16 times (one more press after reaching 7.5
hours); the "TIMER" indicator will be off.
COOL button
1. Press COOL button, If the water reach the level, the "COOL" indicator will be on and the
pump starts to work.
2. After about 3 minutes, the comfortable cool wind with moisture comes out.
3. Press it again to shut off. The COOL indicator turns off then fresh and dry wind comes out.
Note:
1. If press the COOL button when water is under low level or no water, the alarm will sound
after 90 seconds, and COOL indicator will continue to blink about 10 seconds. After 10 se-
conds, the alarm sound stops and COOL indicator will also turn off.
2. The unit can be used without water as normal electrical fan. In this situation, please keep
the COOL button in OFF mode.
ION button
Press the ION button, the ION indicator will be on and the ionizer will start to work, the ne-
gative ion will come out with the wind blowing.
NOTE
- At first use, the appliance may have a slight odor
- At each re-starting, the appliance may have water condensate on the grid
15
PELER 4