Olimpia splendid PELER 4 Mode D'emploi Et D'entretien page 14

Please pay attention when adding water to:
Unplug the appliance
Before refilling, remove any remaining water
Use only clean water
Fill the water tank slowly
Pay attention to the front water level display window to not exceed the maximum level.
POWER button
1. Connect the plug into the power outlet, a beep tone will be heard.
2. Press the POWER button, the FAN indicator and HIGH speed indicator will turn on with
beep tone. The unit will operate in the strongest air of normal mode.
3. Press it again to shut off, the unit stops.
MODE button
Press the MODE button, the NATURE indicator will turn on. Press POWER button 2 times
to turn to the SLEEP mode; press Power button 3 times to turn to the "normal" mode again.
HIGH speed+ SLEEP mode:
In HIGH speed mode, press SLEEP mode,
Press the SLEEP button when SPEED mode is to set SLEEP mode with HIGH wind speed.
Both HIGH and SLEEP indicators will be on. The wind speed will automatically change as
follows: HIGH and MED during the first half hour, MED during the second half hour, LOW
speed for one hour and then STOP.
MED speed + SLEEP mode:
Press the SLEEP button when SPEED mode is MED to set SLEEP mode with MED wind spe-
ed. Both MED and SLEEP indicators will be on. The wind speed will automatically change as
follows: MED and LOW during the first half hour, LOW speed for half an hour and then STOP.
LOW speed + SLEEP mode:
Press the SLEEP button when SPEED mode is LOW to set SLEEP mode with LOW speed.
Both LOW and SLEEP indicators will be on. LOW wind comes out 10 seconds and stops 5
seconds alternately every 15 seconds until power off.
Note: To avoid overcooling, do not adjust the direction the wind to the human body.
.
HIGH speed+ NATURE mode:
Press the NATURE button when SPEED mode is HIGH to set NATURE mode with HIGH
speed. Both HIGH and NATURE indicators will be on. The wind speed will automatically
change with time as follows: HIGH, MED and LOW, alternatively.
MED speed + NATURE mode:
Press the NATURE button when SPEED mode is MED to set NATURE mode with MED spe-
ed. Both MED and NATURE indicators will be on. The wind speed will automatically change
14
OPERATING INSTRUCTIONS