Trelock COCKPIT2 FC 525 Mode D'emploi page 27

6.5 "Pilot" PILOT menu
Current speed
Current time
Day kilometre coun-
ter (adjustable)
3 seconds
52
Setting of day kilometre counter
By pressing and holding the SET button for
3 seconds, you can change the display of
the day kilometre counter in the "Set km"
window (only possible with deactivated
stopwatch). This function is helpful if you
have made a detour, for instance, despite
the fact that you are otherwise following
a road book.
6.7 "Set" SET menu
Changing the presetting
Current speed
Total ride time
(for Bikes 1+ 2)
Total kilometres
(for Bikes 1+ 2)
6.6 "Total" TOTAL menu
Current speed
Total ride time
(of current bike)
Total kilometres of
current bike
If you wish to use your computer on 2 bikes,
you must select the appropriate bike on the
computer prior to starting your ride.
By pressing the SET button,
the bike currently selected
appears on the display.
Use the MODE button to
change bikesand confirm
your selection via the SET
button or, after 5 seconds,
the bike displayed is
automatically confirmed.
The total kilometre status and total ride
time of the current bike are displayed via
the "Total" menu.
The total kilometre status can be adjus-
ted via the "Set" menu, enabling you,
for instance, to transfer the kilometre
reading from an old bike computer to
your new TRELOCK computer.
By pressing and holding the SET button in
the "SET" menu for 3 seconds, you then
have the option of correcting your default
settings and making further setting. Press-
ing the MODE button brings you automati-
cally to the menus "Clock?" "Wheel Size?"
with its submenus "Bike 1" and "Bike 2"
and "Total km" one after the other. Press the
SET and MODE buttons simultaneously for
3 seconds to move to the general default
settings (P. 40, Point 5.ff).
53