Setting The Current Time - Trelock COCKPIT2 FC 525 Mode D'emploi

5.4 Setting the current time

If you wish to change the time, press
the SET button. One after another,
hours, minutes and seconds (start
automatically after confirmation of
minutes) can be changed via the
MODE button. Use the SET button
to confirm your entries and to move
to the next digit.
46
5.5 Entering and changing the PIN anti-theft protection
You can use a PIN to protect your cycle computer from misuse
by unauthorized people. The cycle computer cannot be used
unless the correct PIN is entered. Once the time has been set,
you automatically access the "Change PIN?" window. Here you
can enter your own PIN and, if necessary, subsequently change
it. If you don't wish to use a PIN, press the MODE button. Other-
wise, after pressing the SET button, you will be asked to enter
the old PIN (default setting is "0000"). To this end, press the
MODE button until such time as the appropriate digit appears
and then use the SET button to move to the next digit. PIN input
is monitored. Should the PIN have been entered incorrectly, the
message "Wrong PIN" appears for approx. 3 seconds and you
will be asked to reenter the PIN. If the PIN is correct, input a new
PIN of your choice as described above. Once the last digit has
been confirmed via the SET button, PIN entry must be repeated.
Should the repeat PIN entry be incorrect, you will return
automatically to the "Change PIN?" window. Note down your
personal PIN on Page 34 so that it is readily available if required!
?
47