Lindy CPU Switch P Série Manuel Utilisateur page 7

English Manual
Step 1
Switch off all the computers to be attached.
Step 2 – Local Console
Connect the keyboard, monitor and mouse
directly to the sockets of the LINDY CPU
Switch labelled Console Port. If your
keyboard has a 5 Pin DIN connector you can
use a PS/2 adaptor (LINDY No. 70129).
Please note: Serial Mice with 9 Way D or
USB connectors are not supported and
cannot be used!
Step 3 – Remote Console (PXT only)
1. Use CAT5 or higher, straight through type network cable. The maximum connection
distance is 150m (500 feet)
2. Plug one end of the cable into the RJ-45 connector on the PXT switch. Plug the other
end of the cable into the RJ-45 port on the Remote Receiver module
3. Connect a monitor, keyboard and mouse to the relevant ports on the Remote
Receiver module
4. Connect a local workstation computer to the relevant ports on the Remote Receiver
module
5. Connect the power adapter to the socket on the Remote Receiver module
5
To Power
Adapter