Dab Setup; Presetting Dab/Fm Stations Manually - Onkyo CS-265DAB Manuel D'instructions

Listening to the Radio—Continued
4. Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
Qua„ „ l i„ „ t y„ „ : „ „ 8„ „ 6 %
5. Multiplex Name
Displays the name of the current multiplex.
„ „ D A„ „ B
6. Multiplex Number and Frequency
Displays the number and frequency of the current
multiplex.
12B„ „ 2„ „ 2 5„ „ . „ „ 6 M„ „ H z

DAB Setup

Use the following functions and settings to set up DAB
digital radio.
1 Press the [MENU] button.
2 Use the [q]/[w] buttons to select the item
you want to set, and then press the
[ENTER] button.
The items are explained below.
■ Scan
This setting determines which DAB bands are scanned
by the Auto Scan function (see page 26).
World (default): Band III (5A–13F).
UK: Band III (9A–13F).
Note:
• When UK is specified, Auto Scan will be executed in
the frequency range of 9A-13F.
■ DRC
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels—ideal for listening to the radio late
at night when you don't want to disturb anyone.
Use the [q]/[w] buttons to select the following options,
and then press the [ENTER] button.
0 (default): DRC off.
1: Large reduction in dynamic range.
1/2: Small reduction in dynamic range.
■ Tuning Mode
With this setting, you can sort the available stations
alphabetically, by multiplex, or active stations.
Use the [q]/[w] buttons to select the following options,
and then press the [ENTER] button.
Alphabet (default):Sort stations alphabetically.
Multiplex: Sort stations by multiplex.
Active ST: Sort by active stations.
Receivable stations appear at the
top of the list. stations that cannot
be received properly appear at the
bottom of the list.
Presetting DAB/FM Stations
Manually
You can preset one station at a time up to 40 DAB/
40 FM stations.
In this way, you can tune in a preset station without
adjusting the frequency.
1
Tune into the station that you want to store
as a preset (see page 26).
2 Press the [MENU] button, use the [q]/[w]
buttons to select "PresetWrite>", then
press the [ENTER] button.
3 Use the [q]/[w]buttons to specify the
preset number to which you want to preset
the station, then press the [ENTER]
button.
27
En-