YT Industries Decoy 29 Mode D'emploi page 41

Move the clutch lever to the "Off" position as
4.2.1
indicated in the illustration. The "On" position
engages the clutch which makes it harder to
handle the chain..
Tighten the axle by hand to approximately 10-
4.2.4
15nm of torque.
REAR WHEEL ASSEMBLY
Pivot the derailleur towards the rear and place
4.2.2
the wheel in the frame, the built-in frame
guides will help you position the wheel cor-
rectly. Make sure to place the chain on the
smallest cog.
By pulling the lever outwards you can adjust
4.2.5
its position. Align the lever handle in the for-
ward direction along the seatstay to minimize
the risk of damage to the lever. Place the
clutch lever (see picture 1) back in the "On"
position to engage the clutch.
Push the axle in as far as it will go, then begin
4.2.3
to fasten it by turning the lever in the clock-
wise direction.
Pl ea se f ol l ow th e
torque spe cif i cat ions of
the ma nufacture rs:
Rear wheel axle // 10 – 15 Nm
y t 4 1