Authorized Service - LGB 20761 Instructions De Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

power supplies (transformers,
power packs and controls) only.
The use of non-LGB power sup-
plies will void your warranty.
Use this model with LGB power
supplies with an output of at least
1 amp. For more information on
LGB power supplies for indoor,
outdoor and multi-train operation,
see the LGB catalog.
Attention! After extended opera-
tion, this model may leave carbon
dust or other debris around the
track. This dust and debris can
stain carpet and other materials.
Consider this when setting up
your layout. Ernst Paul Lehmann
Patentwerk and LGB of America
are not liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level 1 - Beginner
Level 2 - Intermediate
Level 3 - Advanced
Attention! Improper service will
void your warranty. For quality
service, contact your authorized
retailer or an LGB factory service
station (see Authorized Service).
Lubrication 1
The side rod ends should be lubri-
cated occasionally with a small
amount of LGB Maintenance Oil
(50019).
Cleaning 1
This model can be cleaned exter-
nally using a mild detergent and
gentle stream of water. Do not
immerse this model.
Replacing the light bulbs 1
Front lanterns: Pull the socket
down and out of the lantern.
Remove and replace the bulb.
Reassemble.
Rear lanterns: Carefully pry the
lens away from the lantern. Using
tweezers, remove and replace the
bulb. Reassemble.
Cab light: Using tweezers, remo-
ve and replace the bulb.
Replacing
generator 2
- Pull the safety cover out of the
smoke stack (Fig. 2).
- Use pliers or tweezers to pull the
old smoke generator out of the
stack (Fig. 3).
- Cut the wires to the old genera-
8
the
smoke
tor and attach them to the repla-
cement generator.
- Insulate the connections and
push the replacement generator
into the stack (Fig. 4).
- Reassemble.
Replacing the traction tire 2
- Use a small, straight-blade scr-
ewdriver to pry the old traction
tire out of the wheel groove.
- Use a small, straight-blade scr-
ewdriver to gently pry the new
traction tire into the wheel groo-
ve.
- Make sure that the traction tire is
seated properly in the wheel
groove.
Maintenance parts
50010 Smoke
Fluid
50019 Maintenance Oil
51020 Gear Lubricant
55020 Multi-Train System
Decoder
55026 Decoder Interface Cable
62201 Standard-Motor
63120 Brushes, 14mm, 16mm,
8 pieces
65853 Smoke Generator, 5V
68511 Plug-In Bulb, Clear, 5V,
10 pieces
69104 raction Tire, 37.5mm,
10 pieces

AUTHORIZED SERVICE

Improper service will void your
warranty. For quality service,
contact your authorized retailer or
one of the following LGB factory
service stations:
Ernst Paul Lehmann Patentwerk
Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone: (0911) 83707 0
Fax: (0911) 8370770
LGB of America
6444 Nancy Ridge Drive
San Diego, CA 92121
USA
Telephone: (619) 535-9387
Fax: (619) 535-1091
You are responsible for any ship-
ping
costs,
customs fees.
and
Cleaning
insurance
and

Publicité

Table des Matières
loading

Table des Matières