Speaker Placement And Room Acoustics - KEF Reference Série Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15

2.3 Speaker Placement and Room Acoustics

The listening room is one of the most variable elements in the hi-fi chain and its effect cannot be emphasised too strongly, nor can its effects
be reliably predicted. Spacing the speakers approximately 2m - 3m (6' - 10') apart will allow the stereo images to develop fully. You should
sit at a distance at least equal to and preferably greater than the distance between the speakers.
Positioning the speaker in a corner or near to a side wall is not recommended as the significant bass boost caused by this position will affect
the sound and cause the stereo image to deteriorate. However, placement close to the front wall is catered for in the Boundary
Compensation Device (see later). It is best to place the speakers symmetrically within the room, relative to the walls, ceiling and floor, where
possible. Be aware also that soft furnishings near to a speaker will deaden the sound - similarly, nearby reflective surfaces may brighten up
the sound. Move the speakers until you are satisfied that the sound is right and that the stereo image is well defined.
Like all other KEF Uni-Q
®
loudspeakers, your Reference Series loudspeakers are designed to be used with little or no 'toe-in'. However if
required a 'brighter', or 'sharper' sound may be obtained by pointing the speakers directly towards the listening position.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

201203205207202c204c

Table des Matières