Setting The Timer Function - Qlima ECO 1700 Manuel D'utilisation

4
110
man_ECO1700('20) V7.indd 110 man_ECO1700('20) V7.indd 110
Corresponderende dagnummer
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
off
Table 2
b. Setting the current hour
1. Press key 1 and then key 3 several times until MN02 appears on the display,
alternating with the current hour.
2. Press key 1 or 2 to set the current hour.
3. Press key 3 to save the data and proceed to menu MN03.
c. Setting the current minutes
1. Press key 1 and then key 3 several times until MN03 appears on the display,
alternating with the current minutes.
2. Press key 1 or 2 to set the current minutes.
3. Press key 3 to save the data. Then wait approximately 20 seconds and the
display will return automatically to normal operating mode.

SETTING THE TIMER FUNCTION

G
Make sure that the current day, hour and minutes are set before
starting to program the timer function.
The timer function can be set using the menus MN05 to MN10. Two switch-on times
and two switch-off times can be set.
1. Press key 1 and then key 3 several times until MN05 appears on the display.
2. Press key 1 or 2 to set the desired switch-on time for program 1. The time
advances by 10 minutes each time key 1 or 2 is pressed. Press and hold key 1
or 2 to scroll rapidly to the times to be set.
3. Press key 3 to save the settings of menu MN05 and to go to menu MN06.
4. Press key 1 or 2 to set the desired switch-off time for program 1. The time
advances by 10 minutes each time key 1 or 2 is pressed. Press and hold key 1
or 2 to scroll rapidly to the times to be set.
5. Press key 3 to save the settings of menu MN06 and to go to menu MN07.
6. You must indicate in menu MN07 whether the settings of menu MN05 and
MN06 must be used or not. ON or OFF can be selected with keys 1 and 2.
ON: ON: If the setting in menu MN05 and MN06 is to be used, so that the
stove will turn on and/or off automatically. LED 6 will also illuminate on the
display.
OFF: If the setting in menu MN05 and MN06 is not to be used. The stove will
not switch on and/or off automatically. LED 6 will not illuminate.
7. Press key 3 to save the settings in menu MN07 and to go to menu MN08.
8. A second on/off time can be set in the same way as described above, by pro-
gramming menus MN08 to MN10.
Huidige dag
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
No day selected
30-07-20 16:47 30-07-20 16:47