THOMSON CKT620FD Guide D'installation Et D'utilisation page 26

4 4 / / SPECIAL MESSAGES, INCIDENTS
EN
•On first use
YOU OBSERVE THAT:
A special lamp appears.
Your installation blows a fuse.
Only one side works.
•On switching on
YOU OBSERVE THAT:
The hob does not operate and
the indicator lights on the
control panel do not light up.
the hob does not function, the
information is displayed.
•Whilst in use
YOU OBSERVE THAT:
The hob has stopped operating
and is beeping every 10 seconds
approximately and a
displayed.
A series of small
displayed.
Warning
In the event of breakage, crack or fissure, even minimal, of the vitroceramic glass,
immediately disconnect your appliance to prevent a risk of electric shock.
Contact the After-Sales Service Department.
POSSIBLE CAUSES:
Working normally.
The electrical connection of
your hob is incorrect.
POSSIBLE CAUSES:
The machine is not connected
to the power source. The
power source or connection is
defective.
The hob is locked
POSSIBLE CAUSES:
There was an overflow or an
object is in contact with the
control panel.
or F7 is
The electronic circuits have
or F7 is
heated.
26
WHAT YOU SHOULD DO:
Nothing.
Check that it is compliant.
See section on electrical
connection.
WHAT YOU SHOULD DO:
Inspect the electrical cir-
cuit breaker and fuses.
See section on using
the child safety system
WHAT YOU SHOULD DO:
Clean the hob or remove
the object, then begin
cooking again.
See "Build-in" section.