Ir Remote Control - Cameo MULTI FX BAR EZ Manuel D'utilisation

IR REMOTE CONTROL

10
Aim the infrared remote control directly at the infrared sensor on the front or rear of the lamp.
The maximum range is approximately 8 metres. In DMX and Slave modes, the remote control
is deactivated. (Battery for IR remote control: CR2025)
Blackout
Auto pro-
gramme
Music-control
Pause
Colour Selection
PAR
Derby
Strobe
Numeric keys
The ON/OFF button is used to switch off all spotlights and
effects, regardless of operating mode enabled via the remote
control. By pressing the ON/OFF button again, the previously
selected mode is re-activated.
Auto Programmes Au01 - Au10, programme selection by repeat-
ed pressing. Selection of the LEDs via buttons A, B and C.
Music-controlled programmes SP01 - SP10. Selection by press-
ing repeatedly. Selection of LEDs with buttons A, B and C. Adjust
the microphone sensitivity on the device (MIC SENSITIVITY).
Stops programme execution ("freezing" of the current scene).
Press again to continue the programme.
Activates the static mode operating mode and colour selection
for the LED spotlights and derby effects. Adjusting the derby
rotation in the lighting menu (static mode). Return to auto or
sound programme by pressing AUTO or MUSIC.
Activates/deactivates LED spotlights.
Activates/deactivates derby LEDs
Activates/deactivates strobe LEDs
Setting the running speed for the auto-programme. 1 = slowest,
9 = fastest run speed (0 = no function).
Switching between auto and music-controlled programmes.
No function