Operation - Panasonic CZ-RWSU2 Mode D'emploi

5. Operation

, Heat , Dry , Cool , Fan
Auto
Models that only provide the cooling function cannot operate in the auto or heating modes.
Power: Turn on the power of the indoor unit at least 14 hours
before operation.
1. Press .
2. Press and select from among Auto
Cool and Fan
and select the desired speed.
3. Press
If set to Auto , the fan speed switches automatically. (Auto does
not work when in the Fan mode.)
4. Press one of the
temperature.
Temperature settings cannot be made when in the Fan mode.
Auto
Heat
Dry / Cool
Stop: Press .
When the unit is stopped with the remote control, even though the
compressor of the outdoor unit stops, the fan on the outdoor unit
may continue to run for a while.
.
buttons and set the desired
MAX MIN
27 17
26 16
30 18
, Heat , Dry ,
EN-7
3
1
4
EN
2