BREIL CHRONO Mode D'emploi page 16

1. Pull out the crown to the first click.
2. Press and hold button
* * The alarm hands move quickly if button
3. Push the crown back in to normal position.
Note: The single time alarm cannot be set to a time more than 12 hours ahead of the
current time. While you keep button
quickly, they stop when they indicate the current time and the alarm is
disengaged. In this case, release button
again to set the alarm hands to the desired time.
When the crown is at the normal position, the alarm hands indicate the current
time when the alarm is disengaged and the designated alarm time when it is
engaged.
12
to set the desired alarm time.
is kept pressed
pressed to advance the alarm hands
and then press and hold the button