Hansgrohe Tango C 042720 Série Instructions De Montage / Mode D'emploi / Garantie page 14

10
11
12
14
Install the check valve in the elbow, with the arrow
pointing in the direction of the water flow.
Remove the plaster shield from the handshower
holder.
2
Pull out on the handshower hose.
Screw the handshower holder escutcheon into
place.
Install the elbow.
1
Place a black rubber hose washer in the elbow.
Screw the handshower into the elbow.
Rest the handshower in the holder.
English